JoomlaLock.com All4Share.net

Upcoming Courses

RO Level 2: Seawater Reverse Osmosis System Operation & Features of Optimum Design

  • COURSE DATES: 23 - 26, January, 2017
  • DAYS: 4
  • LOCATION: MEDRC Training Facility, Muscat Oman
  • STANDARD: USD 1,540
  • E.B.**: USD 1,386
  • IF REG. BY: Sunday, 25 December 2016
  • FINAL REGISTRATION DAY: Monday, 16 January 2017

1. Objective:

This training course will take you step by step through the features of good RO unit design, pretreatment and operation. This includes evaluating the scaling, fouling and chemical attack characteristics of different feed waters, to good RO/NF unit designs to good operation. You will learn things that you will get anywhere else. This training course will take you step by step through the features of good RO unit design, pretreatment and operation. This includes evaluating the scaling, fouling and chemical attack characteristics of different feed waters, to good RO/NF unit designs to good operation. You will learn things that you will get anywhere else.

2. Who should attend this course:

SWRO Plant Operates and Technicians

SWRO Plant Supervisors and Engineers (to qualify for next levels of training)

Newcomers in RO Desalination (looking for Basic Level)

3. Course duration:

4 days session

4. Course instructor:

Riadh Dridi is a project manager & instructor in MEDRC. He has 16 years of experience as supervisor / site engineer / part owner of his own business as consulting and water analysis firm/ project manager. During his 16 years experience he has work in the design, operation, maintenance troubleshooting, consulting and costing of water and waste water treatment system including membrane, ion exchange, sewage treatment, pre & post treatment, disinfection and pool equipments. Riyadh holds a B.S degree in geo-resources & Environment and was recently approved as Certified Instructor to deliver David Paul world renowned training.

5. Agenda:

 DAY 1

08:00 - 08:30 Welcome٬ Registration
08:30 - 10:00 Introductions
Water Contaminants
Dissolved & Suspended contaminants
The Characteristics of contaminants
10:00 - 10:15 Coffee Break
10:15 - 11:30 Semipermeable RO/NF membranes
Structure
Water Flux / Salt Flux
Rejections of contaminants
Osmosis & Reverse Osmosis
Osmotic Pressure
Applied Pressure
Net Driving Pressure
Water Flux / Salt Flux
١ 11:30 - 11:45 Coffee Break
11:45 - 12:45 Membranes
Flat sheet٬ Hollow Fiber
Tap٬ Brackish & Seawater
Low pressure٬ low fouling٬ high rejection
12:45 - 13:45 Lunch Break
13:45 - 15:15 Membranes Elements
2", 2.5", 4", 8", ....18.25" elements
Envelopes / Feed spacer / Permeate spacer / Flow Path
Low pressure٬ low fouling٬ high area & high rejection
Workshop 1: Build a Simulated element
15:15 - 15:30 Questions & Answers
 
DAY 2
08:15 - 08:30 Attendance Registration
08:30 - 09:00 DAY 1 Review
09:00 - 10:00 Pressure Vessels
End port٬ side port & multiport
Stainless steel٬ fiberglass
Shimming elements
RO/NF units
POU٬ POE٬ industrial٬ municipal
Single stage٬ multistage
Single pass٬ double pass
10:00 - 10:15 Coffee Break
10:15 - 11:30 SWRO Unit Operation
POU
Single Pass / Double pass
Recovery rate / Concentration factor
Water flux, Net driving pressure and Salt Passage per element
NDP and SP versus temperature
11:30 - 11:45 Coffee Break
2", 2.5", 4", 8", ....18.25" Pressure Vessels
11:45 - 13:00 Source Waters
Fresh / Brakish / Seawater
Well water٬ Surface water
A complete RO feed water analysis
Cations & Anions
Other
How to read a complete water analysis report
Solution Neutrality
Cations٬ anions
Charge balance (ppm as CaCO3 or meq/L)
13:00 - 14:00 Lunch Break
14:00 - 15:15 Using free software programs to evaluate feed waters
Workshop: Determining if feed water analysis is complete and can be relied on
 
DAY 3
 
08:15 - 08:30 Attendance Registration
08:30 - 09:00 Day 2 Review
09:00 - 10:00 Analysis that must be performed on-site
pH
Temperature
Silt Density Index SDI
Biological Reaction Tests (BARTs)
Hydrogen Sulfide
10:00 - 10:15 Coffee Break
10:15 - 11:30 Evaluating Scaling Potentials
Scaling
Carbonate Scaling Potential
Non Carbonate Scaling Potential
Silica Scaling Potential
11:30 - 11:45 Coffee Break
11:45 - 13:00 Evaluating Non-Living Fouling Potentials
Fouling Overview
Turbidity, TSS
Silt Density Index (SDI)
Oxidation: Iron, Manganese, Hydrogen Sulfide
Aluminum
13:00 - 14:00 Lunch Break
14:00 - 15:15 Evaluating Living Fouling Potentials
Temperature, TOC, Bio-counts
Chlorination / Dechlorination
Nitrate, Phosphate
SDI
Good Design Means Low Fouling
Water Flux
Cross flow
Chlorination / Dechlorination
15:15 - 15:30 Questions & Answers
 
DAY 4
08:15 - 08:30 Attendance Registration
08:30 - 09:00 Day 3 Review
09:00 - 10:00 Lower Fouling RO/NF Unit Designs
Hybrid element loading
First stage permeate backpressure
Interstage Booster Pumps
Concentrate Recycle
10:00 - 10:15 Coffee Break
10:15 - 11:15
13:00 - 14:00 Lunch Break
14:00 - 14:15 Final Questions & Answer
14:15 - 14:30 Certificate distribution - End
Evaluation Exam
11:15 - 11:30 Coffee Break
11:30 - 13:00 Pretreatment
Scaling Control
· Recovery Rate
· Acid
· Scale Inhibitor
· Softening
· Post-shutdown flushes
 

End

 To Regsiter for this course contact us on This email address is being protected from spambots. You need JavaScript enabled to view it. or +968 24 41 55 31

Training Course Online Registration Form

Course Title(*)
Invalid Input

Full Name (*)
Invalid Input

Email(*)
Invalid email address.

Phone(*)
Invalid Input

Country(*)
Invalid Input

Company Name (*)
Invalid Input

Job Position(*)
Invalid Input